JORDANE Total Tattoo Cover is a specially formulated cover-up which completely masks your tattoo. Dries quickly, product is smudge, waterproof and transfer-resistant.
JORDANE Total Tattoo Cover 是一種特殊配方的遮蓋物,可完全遮蓋您的紋身。速乾,產品防污、防水和防轉移。
This light and highly pigmented formula will dry in seconds. JORDANE Total Tattoo Cover comes in 3 different pallets - Original, Dark Skin, and Primary Plus. Total tattoo cover can be used to cover tattoos, dark circles, blemishes and any other marks on your skin that you would like to cover. It has no after effects and does not pose a health risk for your skin. It is creamy and can be blended to get a customized tattoo cover. It requires no setting powder or activator, simply sponge or brush on the product to get the desired coverage. A highly desired product that is used intensely in the film and television, Total Tattoo Coverage can be diluted with our JORDANE “Rejuvenator” so that the product can be used as an all-day foundation base. The primary colors of our total tattoo cover product can be used as clown colors or as a base color (complete this statement)… The best part is that you can always remove this cover to reveal your tattoo again as it does not remove your tattoo but only covers it. If you ever wish to cover out that tattoo on your body instead of removing it, then this is the perfect solution for you.
Directions for total tattoo coverage:
- Step 1: Use an astringent or something similar to remove any excess oils or grease from the skins surface for maximum adhesion.
- Step 2: For dark pigmented tattoos start with an orange or rose coloured alcohol paint to neutralize the dense colour. You do not paint it out; just dull the intensity of the blacks. This will dry in seconds.
- Step 3: With a spatula separate a small amount of cream foundation from the individual squares and place it on the inside of the cover and use the lid as a palette. This way you do not contaminate the individual squares of pigment.
- Step 4: With a brush or sponge you can now apply the colour to the model’s skin. Use at least three flesh tones and apply the colours in layers. Allow twenty to thirty seconds for each layer to dry on the skin. The cream is heat activated so the use of a hairdryer will set the colour quicker. Test with you finger; the colour will be smudge proof. Once the layer is dry apply the second. Dry it and continue until the tattoo is covered to your satisfaction.
- Step 5: If the tattoo is to come in contact with wardrobe a fixer spray is recommended for added protection. A water based sealer is preferred, such as Jordane’s Aqua Bamboo.
NOTE: If too much colour is applied it will dry crusty in appearance and can flake off. This dried surface can be thinned and blended with 99% Isopropyl Alcohol. The same can be done to any densely coloured edges. Blend with an alcohol dampened sponge or brush.
Directions for scar and discoloured skin coverage:
- Step 1: Use an astringent or something similar to remove any excess oils or grease for maximum adhesion.
- Step 2: With a spatula separate a small amount of cream foundation from the individual squares and place it on the inside of the cover and use the lid as a palette. This way you do not contaminate the individual squares of pigment.
- Step 3: Thin the cream colour with a few drops of the Total Tattoo Coverage Rejuvenating Serum.
- Step 4: With a brush or sponge you can now apply the colour to the model’s skin. Use at least three flesh tones and apply the colours in layers. Allow twenty to thirty seconds for each layer to dry on the skin. The cream is heat activated so the use of a hairdryer will set the colour quicker. Test with you finger; the colour will be smudge proof. Once the layer is dry apply the second. Dry it and continue until the imperfection is covered to your satisfaction.
- Step 5: If the scar or imperfection is to come in contact with wardrobe a fixer spray is recommended for added protection. A water based sealer is preferred, such as Jordane’s Aqua Bamboo.
NOTE: If too much colour is applied it will dry crusty in appearance and can flake off. This dried surface can be thinned and blended with 99% Isopropyl Alcohol. The same can be done to any densely coloured edges. Blend with an alcohol dampened sponge or brush.
The usual Caution can be applied.
這種輕盈和高度著色的配方會在幾秒鐘內乾燥。JORDANE Total Tattoo Cover 有 3 種不同的托盤 - Original、Dark Skin 和 Primary Plus。Total tattoo cover 可用於遮蓋紋身、黑眼圈、瑕疵和您想要遮蓋的任何其他皮膚痕跡。它沒有後遺症,不會對您的皮膚造成健康風險。它是奶油狀的,可以混合以獲得定制的紋身蓋。它不需要定型粉或活化劑,只需在產品上用海綿或刷子即可獲得所需的覆蓋範圍。Total Tattoo Coverage 是一款備受期待的產品,在電影和電視中大量使用,可以用我們的 JORDANE “Rejuvenator” 稀釋,使該產品可以用作全天候粉底。我們整個紋身覆蓋產品的主要顏色可以用作小丑顏色或基礎顏色(完成此聲明)......最好的部分是您可以隨時取下此覆蓋物以再次顯示您的紋身,因為它不會去除您的紋身但只覆蓋它。如果您希望遮蓋身上的紋身而不是將其去除,那麼這就是您的完美解決方案。
紋身總覆蓋率說明:
- 第 1 步:使用收斂劑或類似的東西去除皮膚表面多餘的油脂,以獲得最大的附著力。
- 第 2 步:對於深色紋身,先用橙色或玫瑰色的酒精顏料中和濃密的顏色。你不把它畫出來;只是減弱了黑人的強度。這將在幾秒鐘內乾燥。
- 第 3 步:用抹刀從各個方塊中分離出少量奶油色粉底,並將其放在蓋子的內側,並將蓋子用作調色板。這樣你就不會污染顏料的各個方塊。
- 第 4 步:現在您可以使用刷子或海綿將顏色塗抹在模特的皮膚上。使用至少三種膚色並分層應用顏色。讓每一層在皮膚上乾燥二十到三十秒。奶油是熱激活的,因此使用吹風機可以更快地定色。用你的手指測試;顏色將防污。一旦該層乾燥,應用第二層。擦乾並繼續,直到紋身被覆蓋到您滿意為止。
- 第 5 步:如果紋身要與衣櫥接觸,建議使用定影劑噴霧以增加保護。首選水基密封劑,例如 Jordane 的 Aqua Bamboo。
注意:如果塗上太多顏色,它會在外觀上變硬並剝落。這個乾燥的表面可以稀釋並與 99% 的異丙醇混合。可以對任何顏色濃密的邊緣執行相同的操作。用蘸有酒精的海綿或刷子混合。
疤痕和變色皮膚覆蓋說明:
- 第 1 步:使用收斂劑或類似的東西去除多餘的油或油脂,以獲得最大的附著力。
- 第 2 步:用抹刀從各個方塊中分離出少量奶油色粉底,並將其放在蓋子的內側,並將蓋子用作調色板。這樣你就不會污染顏料的各個方塊。
- 第 3 步:用幾滴 Total Tattoo Coverage Rejuvenating Serum 稀釋奶油色。
- 第 4 步:現在您可以使用刷子或海綿將顏色塗抹在模特的皮膚上。使用至少三種膚色並分層應用顏色。讓每一層在皮膚上乾燥二十到三十秒。奶油是熱激活的,因此使用吹風機可以更快地定色。用你的手指測試;顏色將防污。一旦該層乾燥,應用第二層。將其擦乾並繼續,直到您滿意地遮蓋瑕疵。
- 第 5 步:如果疤痕或瑕疵要與衣櫥接觸,建議使用固定噴霧劑以增加保護。首選水基密封劑,例如 Jordane 的 Aqua Bamboo。
注意:如果塗上太多顏色,它會在外觀上變硬並剝落。這個乾燥的表面可以稀釋並與 99% 的異丙醇混合。可以對任何顏色濃密的邊緣執行相同的操作。用蘸有酒精的海綿或刷子混合。
可以應用通常的警告。
JORDANE COSMETICS TOTAL TATTOO COVERAGE ORIGINAL MINI PALETTE
貨品由外國入口,未有現貨,需預訂,約14-21日到貨

